How to Address an Envelope to a Business, the USPS Way

The business envelope format USPS prefers, where the ATTN line goes, and 8 address blocks to copy for letters to business owners.

Thijs Veer, Founder

12 min read

Contents

Here is how to address an envelope to a business in the format the US Postal Service prefers. Write four lines in capital letters with no punctuation. ATTN and the person's name go first. The business name goes second, the street address third, and the city, state and ZIP+4 Code last. USPS Publication 28 puts the attention line above the firm name.

ATTN [FIRST NAME] [LAST NAME]
[BUSINESS NAME]
[STREET NUMBER] [STREET NAME] [STE NUMBER]
[CITY] [STATE] [ZIP+4]

Your own address goes in the top left corner and the stamp in the top right. The rest of this page covers the full 11-line format, 8 address blocks for the cases you will meet, and a check to run before you mail.

What is the USPS business envelope format?

The business envelope format is the order of lines that USPS Publication 28, Postal Addressing Standards, recommends for mail to a company. The October 2024 edition lists 11 possible lines. Pub 28 itself says it is unlikely that any one address uses all 11.

Here they are, top to bottom, from section 33 and section 341.

LineWhat it holdsExample from Pub 28Needed for delivery?
1Optional endorsement lineA code lineSome USPS programs
2Key line dataA code lineSome USPS programs
3Intelligent Mail address block barcodeBarcodeSome USPS programs
4Mailstop codeMSC 4567ABCDNo
5Attention lineMS MILDRED DOENo
6Individual titlePROFESSIONAL ENGINEERNo
7Functional titleDESIGN ENGINEERING MANAGERNo
8Group, department or divisionBRAKE CONTROL DIVISIONNo
9Business or firm nameBIG BUSINESS INCORPORATEDYes
10Delivery address line12 E BUSINESS LN STE 209Yes
11City, state, ZIP+4 lineKRYTON TN 38188-0002Yes

Three rules follow from the table.

  1. The last three lines are fixed. Section 343.1 says the firm name, the delivery address and the city line "must appear as the last three lines of the address block."
  2. Everything about the person sits above the firm. Lines 4 to 8 are for the mailer. Section 33 says the name, title, department and mailstop details serve the mailer's marketing and have no effect on whether USPS can deliver the piece. They help the front desk hand the letter to the right person.
  3. Keep it to about five lines. Pub 28 says "generally, only five lines of address information are suitable for automated processing when not barcoding." If you have more, drop lines 4 to 8 first. Section 343.3 adds that a name on the attention line or a functional title may be critical for delivery inside the firm, but that both may not be necessary.

That answers how to address a business envelope in most cases. Name, firm, street, city. The ATTN line is where guides disagree.

How do you address an envelope to a business owner by name?

Put ATTN and the owner's name on the first line, above the business name. Section 214 says "The Attention Line is placed above the Recipient Line, that is, above the name of the firm to which the mailpiece is directed."

Some guides reverse this. They put the company first and ATTN on the second line. Section 214 shows both "JOHN DOE" and "ATTN JOHN DOE" above "ABC COMPANY". Follow USPS.

Filled in. A made-up web studio writes to a made-up plumber. The business, the owner and the address are invented for this page.

ATTN PAUL HARLAN
HARLAN PLUMBING & HEATING
915 QUILLBROOK AVE
DAYTON OH 45410

This is the envelope for the letter in our business introduction letter templates. The letter inside says "Dear Mr. Harlan" in normal type. The envelope follows postal style.

Why ATTN and the name? A plumber's office may have more than one person opening the mail. The firm name gets the letter to the building. The name on the first line gets it to Paul.

Which address block fits your letter?

Pick the block that matches what you know about the business. Square brackets mark what you replace. Each block keeps one left margin, as section 212 asks.

1. The owner, by name

The default for a prospecting letter. Use it whenever you can find the owner's name.

ATTN [FIRST NAME] [LAST NAME]
[BUSINESS NAME]
[STREET ADDRESS] [STE NUMBER]
[CITY] [ST] [ZIP+4]

2. The owner, with a title

Add a title when the name alone could be anyone in the firm. Pub 28's own sample in Appendix A puts the title on the attention line, as in "MRS S ONEILL PRES".

ATTN [FIRST NAME] [LAST NAME] [TITLE]
[BUSINESS NAME]
[STREET ADDRESS]
[CITY] [ST] [ZIP+4]

Keep titles short. OWNER, PRES and MGR fit on one line. A long title can take its own line under the name, which is line 6 in the table.

3. You don't know the owner's name

Use the role. Pub 28 calls this a functional title, line 7 in the table.

ATTN OWNER
[BUSINESS NAME]
[STREET ADDRESS]
[CITY] [ST] [ZIP+4]

Filled in. A made-up dental practice where the website lists no dentist by name.

ATTN PRACTICE OWNER
BRIGHTSIDE DENTAL
2200 S FERNMOOR BLVD STE 104
AUSTIN TX 78704

Look for the name before you settle for a role. The About page, the Google Business Profile and the state business registry often list the owner. A letter to a person reads as a letter. A letter to a role reads as a mailing.

4. A department

Put the department under the person and above the firm. That is line 8. Appendix A2 of Pub 28 shows it as a name, then LAW DEPARTMENT, then US POSTAL SERVICE.

[FIRST NAME] [LAST NAME]
[DEPARTMENT NAME]
[BUSINESS NAME]
[STREET ADDRESS]
[CITY] [ST] [ZIP+4]

You will need it for a regional chain or a hospital with a marketing department.

5. A suite that won't fit on the street line

Suite and unit numbers are required when the building has them. Section 213 prefers them at the end of the street line. If the line runs too long, the suite moves to the line just above the street.

ATTN [FIRST NAME] [LAST NAME]
[BUSINESS NAME]
STE [NUMBER]
[STREET ADDRESS]
[CITY] [ST] [ZIP+4]

Filled in. A made-up law office on a street with a long name.

ATTN DANA OKAFOR
OKAFOR FAMILY LAW
STE 1450
3001 NORTHWEST HALLOWMERE EXPRESSWAY
OKLAHOMA CITY OK 73112

Use STE, APT, FL, RM or BLDG. Pub 28 says the pound sign should not stand in for a designator you know.

6. A PO Box and a street address

Some businesses list both. Section 215 says the address you want the letter delivered to goes on the line directly above the city line. Normally that is the PO Box.

ATTN [FIRST NAME] [LAST NAME]
[BUSINESS NAME]
[STREET ADDRESS]
PO BOX [NUMBER]
[CITY] [ST] [ZIP+4]

The ZIP+4 must be the one for the PO Box, because that is the line USPS delivers to.

7. A professional with a suffix

Dentists, lawyers and accountants often use a letter suffix. Pub 28 lists professional suffixes such as DDS and PHD with the name.

ATTN [FIRST NAME] [LAST NAME] [SUFFIX]
[PRACTICE NAME]
[STREET ADDRESS]
[CITY] [ST] [ZIP+4]

Use DR or the suffix, never both. "ATTN JANE ROE DDS" is right. "ATTN DR JANE ROE DDS" says the same thing twice.

8. Your return address

Your block goes in the top left corner. USPS says to put the sender's name or company name, the street address and the city, state and ZIP+4 on separate lines.

[YOUR AGENCY NAME]
[STREET ADDRESS] [STE NUMBER]
[CITY] [ST] [ZIP+4]

The return address tells USPS where to send a letter it cannot deliver (DMM 602). Mail with a company permit imprint must carry one. Use your agency's name. The owner should know who wrote before opening it.

Where do the addresses go on the envelope?

The return address goes top left, postage top right, and the delivery address in the lower middle. Appendix A1 of Pub 28 gives the exact zone. The whole delivery block sits between 5/8 inch and 2 3/4 inches from the bottom edge, with 1/2 inch clear on each side.

On a standard No. 10 envelope, which USPS gives as 9-1/2 inches long and 4-1/8 inches high, that leaves a band about 2 inches tall for the address.

Four details from the same pages.

  • Capitals, dark ink, light paper. Appendix A1 asks for addresses "typewritten or machine printed in dark ink on a light background using uppercase letters."
  • No punctuation needed. Section 222 lets you drop every comma and period except the hyphen in the ZIP+4. The USPS letters page goes further and says not to use them.
  • Two spaces before the ZIP. Section 224 prefers two spaces between the state and the ZIP+4 Code.
  • Run the address along the long side. DMM 101 makes a letter nonmachinable if the delivery address runs parallel to the shorter side.

Anything else you print inside that zone, such as a teaser line, goes above the delivery address and as far from it as you can. A window envelope is fine. DMM 101 says a window in a paper envelope does not make a letter nonmachinable.

These are postal standards, summarized from Publication 28 and the USPS Domestic Mail Manual. This is not legal advice.

What should you change before you mail it?

Check each address against the business itself, then against USPS. Seven steps, in order.

  1. Confirm the owner's name. Use the About page, the Google Business Profile or the state business registry. Spell it as the owner does.
  2. Use the legal or trading name the business uses on its sign. "Harlan Plumbing & Heating" beats "Harlan P&H LLC" if that is what the van says.
  3. Copy the street address from the website footer and the Google listing. If they differ, call the front desk and ask.
  4. Add the suite. Pub 28 section 213 makes the suite number required where the building has one.
  5. Look up the ZIP+4. The USPS ZIP Code Lookup tool returns the full code. USPS asks you to include it whenever possible.
  6. Switch to capitals and drop the punctuation. Keep the hyphen in the ZIP+4.
  7. Count the lines. Five at most. If you have six, drop one of the optional lines above the firm name, such as a title.

That is how to address an envelope to a business so it reaches the owner. The ATTN line is the part to adapt per business. The other three lines come from public records.

What does the wrong envelope cost?

A square or odd envelope costs more postage for no gain. USPS charges $0.82 for a First-Class Forever stamp, which covers 1 ounce, or about 4 sheets of letter paper. A nonmachinable letter pays $0.49 more. DMM 101 makes a letter nonmachinable when its length divided by its height is under 1.3 or over 2.5. A square envelope works out at 1.0. A No. 10 works out at 9.5 divided by 4.125, which is 2.3, so it passes.

Here is the arithmetic for a made-up batch of 250 letters.

EnvelopePostage per letter250 letters
No. 10, up to 1 oz, one Forever stamp$0.82$205.00
Square envelope, nonmachinable$0.82 + $0.49 = $1.31$327.50
Extra cost of the square envelope$0.49$122.50

The square envelope adds about 60% to the postage, and you still print and stuff every letter yourself.

For comparison, a letter your Outbound Machine posts costs about 86 cents. That covers printing one page in black and white, postage and the envelope, sent First Class. 250 letters come to about $215. Our post on what direct mail costs breaks down the other formats.

Why does the envelope matter more in a letter-first sequence?

Because the envelope is the first thing the owner sees from you. In Leadodo's Outbound Machine, a posted letter arrives on day 1. Emails follow on days 4, 7 and 11, and LinkedIn on days 15 and 19. The days are working days. By the time your first email lands, your letter has been at the business for 3 working days.

That changes what the envelope has to do. It needs to reach the owner, and it needs to look like a letter from a person.

  • The ATTN line puts the owner's name on the outside.
  • Your agency name in the return address tells the owner who wrote.
  • A plain No. 10 in a standard format reads as business mail.

Inside, Twip's findings about the prospect's own website become the opening line of the letter. Our guide on how to write a sales letter covers the page itself. Direct mail for agencies covers where letters fit in the rest of your outreach.

You choose how closely to watch what goes out. You can review every letter before it goes, review a sample such as the first 100, or let your Outbound Machine send without review. If you review a sample, run the seven-step address check from this page on each envelope in it.

Questions

Where does ATTN go on an envelope?

On the first line of the delivery address, above the business name. USPS Publication 28 section 214 places the attention line above the name of the firm. The format is ATTN, a space and the person's name, with no colon needed.

Does the company name or the person's name go first on a business envelope?

The person's name goes first. Pub 28 puts the attention line, titles and department above the firm name. The firm name, street and city must be the last three lines.

Should a business envelope have commas and periods?

No. Pub 28 section 222 says all punctuation may be dropped except the hyphen in the ZIP+4 Code. The USPS letters page tells you not to use commas or periods. Punctuated addresses are still accepted.

How do you address an envelope to a department?

Write the person's name first if you have one, then the department, then the business name, the street and the city line. Pub 28's own example reads as a name, LAW DEPARTMENT, US POSTAL SERVICE, then the street. With no name, start with the department.

Can you handwrite the address on a business envelope?

Yes. USPS asks for neat capital letters in pen or permanent marker. For a batch, print the addresses. Pub 28 Appendix A1 prefers machine-printed addresses in dark ink on a light background.

What is the difference between ATTN and c/o?

ATTN points a letter to a person or department at their own workplace. C/O, meaning care of, is for someone receiving mail at an address that belongs to someone else. Pub 28's business format has an attention line and no care-of line, so use ATTN for a business owner.


Next step. See how your Outbound Machine sends a letter that arrives on day 1 and follows with email and LinkedIn. Outbound Machine.

Keep reading

All posts

Your next client is already in the database.

Get started, or book a demo first.